| Feature | Details |
|---|---|
| Product Type | Plastic puppy playpen / indoor plastic playpen |
| Image-Confirmed Panel Styles | Vertical slats, clear inserts, and mixed clear/slatted configurations |
| Image-Confirmed Footprints | Approx. 186 x 126 cm, 126 x 126 cm, 150 x 150 cm, 150 x 100 cm, and 100 x 100 cm |
| Access | Front hinged door by model |
| Divider Option | Central partition shown on one vertical-slat configuration |
| Floor Support | Corner supports and suction cups shown on one clear-panel family |
| Suitable Pets | Puppies and calm small dogs under appropriate supervision |
| Material Note | Molded plastic frames; transparent insert material and exact resin must be confirmed by SKU |
| Cleaning | Wipe-clean molded surfaces; non-abrasive care for clear inserts |
| Positioning Limit | Not chew-proof, climb-proof, jump-proof, or escape-proof |
The source images show three main presentation directions: open vertical-slat panels, full clear-panel layouts, and mixed configurations that combine visibility with ventilated sections. This lets your collection cover different home aesthetics and price positions, but dimensions and hardware must remain tied to the selected model family.
The vertical-slat models provide open airflow and a familiar enclosure appearance. One configuration uses a full slatted perimeter with a front door, while another combines slatted walls with a central divider. Exact bar spacing is not shown in the source file and must be measured on the approved sample before very small puppies are targeted.
Several models use transparent inserts across most of the front and side surfaces. The clear areas make the enclosure visually lighter and allow owners to see the puppy from more angles. The source images do not prove whether the insert is acrylic, PET, polycarbonate, or another transparent material, so the final specification must name the actual material by SKU.
The mixed-panel configuration combines clear lower viewing areas with open slatted sections. This gives buyers a practical middle option between a fully transparent playpen and a traditional slatted pen. Panel mixing should only be offered within a physically compatible system, not assumed across all white plastic models.
Every main product family shown includes a front access door. The door reduces the need to lift a puppy over the wall when replacing bedding, cleaning a toilet zone, adding water, or allowing supervised entry. Door swing, hinge hardware, threshold height, and latch engagement vary by model and should be checked during sampling.
One slatted model is shown with an internal divider that creates two separate zones and front access points. This can support supervised separation of a rest area from a toilet or feeding area, or two short-term puppy zones. It should not be promoted as a purpose-built whelping box unless the final product includes the safety and thermal features required for newborn puppies.
The lifestyle image shows corner support pieces and suction cups under a clear-panel configuration. Suction cups may help on clean, smooth, non-porous floors, but they should not be described as universal for textured tile, grout, carpet, or uneven surfaces. Cup diameter, holding performance, replacement supply, and floor-marking risk should be checked on the approved model.
The largest rectangular layout shown measures approximately 186 x 126 cm. It provides enough visual space for a bed, water, toys, and a separate toilet area, but product listings should still state the internal usable dimensions and panel height before recommending it for a particular puppy size.
A square clear-panel arrangement is shown at approximately 126 x 126 cm. The balanced footprint is suitable for room-corner or central-room displays and gives e-commerce teams an easy size step between compact and large configurations.
The remaining images show a larger 150 x 150 cm square, a 150 x 100 cm rectangle, and a compact 100 x 100 cm square. These should be listed as separate configuration references rather than one adjustable size unless the exact panel count and compatibility are confirmed.
The images show different frame openings, hinges, latches, corner pieces, suction supports, and panel combinations. Similar appearance does not guarantee interchangeability. Each quotation should identify the resin, transparent insert, connector code, door orientation, panel quantity, and available spare parts for the selected SKU.
These molded plastic playpens are intended for indoor puppy routines and calm small dogs. They should not be described as chew-proof, climb-proof, escape-proof, or suitable for powerful dogs. Owners should stop unsupervised use if a puppy can climb, jump, chew through, open the latch, or push the structure significantly.
| Specification | Archova Range |
|---|---|
| Product Type | Plastic puppy playpen / plastic playpen for puppies and small dogs |
| Product Family | Multiple related panel systems; specifications are not universal across the collection |
| Frame | Molded plastic frame |
| Panel Directions | Vertical slats, transparent inserts, and mixed clear/slatted panels by model |
| Image-Confirmed Footprints | Approx. 186 x 126 cm, 126 x 126 cm, 150 x 150 cm, 150 x 100 cm, and 100 x 100 cm |
| Height | Not confirmed in the uploaded images; verify by SKU |
| Door | Front hinged access door by model |
| Divider | Internal partition shown on one slatted model |
| Floor Support | Corner feet and suction cups shown on one clear-panel family |
| Suction Surface | Best suited to clean, smooth, non-porous floors; model-specific performance must be tested |
| Transparent Insert Material | Not confirmed; state acrylic, PET, polycarbonate, or other material only after factory approval |
| Exact Plastic Resin | Not confirmed in the source file; verify by model and compliance requirement |
| Color Shown | White |
| Typical Use | Indoor puppy rest, feeding, play, toilet-zone management, and supervised short separation |
| Suitable Pets | Puppies and calm small dogs; final suitability depends on size and behavior |
| Cleaning | Mild soap and water for molded plastic; non-abrasive care for clear inserts |
| Packing | Flat or partly assembled packing by model, with protected transparent panels and separated hardware |
| Positioning Limit | Not chew-proof, climb-proof, jump-proof, escape-proof, or a substitute for a purpose-built whelping box |
Panel System: Choose a slatted, clear, or mixed-panel family before confirming dimensions, connectors, doors, and spare parts.
Footprint and Panel Quantity: The shown configurations include compact, square, rectangular, and larger layouts. Final panel count and footprint must be approved together.
Door and Divider Direction: Door position, swing direction, latch style, and a divider option can be discussed where the selected model supports the change.
Floor Support: Selected clear-panel models can use suction-cup corner supports. Alternative feet or mat pairing should be evaluated according to the target floor surface.
Color and Branding: Molded color, logo plate, printed label, hangtag, instruction sheet, and carton artwork can be developed according to model feasibility and order quantity.
Compliance Documents: Material declarations, restricted-substance documents, and market-specific test requirements should be agreed before production; “non-toxic” or a named resin should not be claimed without supporting documentation.
Transparent Panel Protection: Use protective film, sleeves, or non-abrasive interleaving so clear inserts do not rub against frames, hinges, or other panels during transit.
Hardware Separation: Latches, hinges, connectors, suction cups, and small parts should be secured in labeled bags or protected positions away from visible panel surfaces.
Model-Coded Parts List: Each carton should state the correct door panel, standard panels, divider where applicable, corner parts, suction cups, and assembly sequence for that exact SKU.
Instructions: Assembly drawings should show connector orientation, door alignment, suction-cup placement, and any model-specific compatibility restrictions.
Export Carton: Final carton size, weight, pallet pattern, drop protection, and retail artwork depend on the selected footprint, panel quantity, and channel requirements.
"“The images originally looked like one white playpen family, but the sample review showed us that the clear, slatted, and mixed-panel versions use different components. Separating the SKUs early saved our team from publishing one inaccurate specification across the whole range.”"
Product Development Manager
Private-Label Pet Brand - Draft Review
"“The 150 x 150 and 150 x 100 layouts gave us two useful retail positions, but the internal divider was the feature our buyers asked about most. We requested a separate parts diagram and replacement-latch list before placing the production order, which made the program much easier to manage.”"
Purchasing Director
Regional Pet Products Importer - Draft Review
"“For online listings, the clear-panel photos were strong, but what helped conversion was showing the actual footprint and explaining that the material and height vary by model. That wording felt more credible than calling every version acrylic or escape-proof.”"
E-commerce Category Manager
Online Pet Retailer - Draft Review
Contact our team for pricing, MOQ details, customization options, and OEM/ODM partnership opportunities.