Product Overview
| Feature | Confirmed Product Direction |
|---|---|
| Product Type | Hard-bottom backseat extender for dogs / dog car seat extender |
| Standard Platform Size | 52 × 24.8 in (approximately 132.1 × 63.0 cm) |
| Panel Construction | Three removable rigid load-bearing panels; board material and load rating not supplied |
| Surface and Barrier | Quilted PU surface, coated layer and TPU moisture barrier with silicone anti-slip base |
| Rear and Side Coverage | 15.7 in rear panel, 21.7 in front panel and two 15 in side wings |
| Travel Configurations | Full-width platform and one-side folded passenger mode |
| Access and Storage | Mesh window, side pockets, four zipper connections and seat-belt access openings |
| Folded Storage Size | 25.2 × 17.3 in (approximately 64.0 × 43.9 cm) |
| Care Direction | Remove all three rigid panels before washing the textile cover; follow the sewn care label |
| Fit Requirement | Measure rear-seat width, platform depth, footwell gap, headrests, door clearance and restraint path |
Key Features & B2B Advantages
Three removable hard panels create a flatter surface across the rear bench and footwell gap.
Full-width and half-width configurations support dog-only travel or a separate passenger position.
A mesh center window maintains a sightline between the front and rear seating areas.
Raised side and front sections help contain fur, mud and routine debris within the covered zone.
Seat-belt access openings allow a separately selected vehicle restraint to be routed through the cover.
Removable panels, a wipe-clean PU surface and a separately washable textile cover simplify care planning.
Private-label programs can review color, trim, quilting, logo placement, packaging and model-specific dimensions.
Three removable rigid panels extend the usable floor from the rear bench toward the front seats. The supported area gives dogs a flatter place to stand, turn and lie down than a soft hammock suspended over an open footwell.
Panel material and tested load capacity are not supplied, so each production SKU should be quoted with a verified structure and rating.
The standard layout is marked 52 in wide by 24.8 in deep, approximately 132.1 × 63.0 cm. It also shows a 15.7 in rear section, a 21.7 in front section and two 15 in side wings.
Vehicle compatibility cannot be determined from body style alone. Publish a measurement diagram so pet owners can compare the product with their actual rear bench, footwell, headrests and door opening.
Four zippered side connections allow selected sections to open or fold. One side can be folded to leave a rear seating position available without removing the complete dog back seat extender.
The remaining dog area, passenger seat belt, footwell, door and any child-seat installation must each remain usable in the chosen vehicle.
The supplied layer graphic identifies a PU surface, coated layer, 230T lining, PP cotton, load-bearing plates, a second 230T lining, TPU moisture barrier and silicone anti-slip base. A separate care graphic confirms three removable rigid panels.
These layers support a clear material story without treating the cover as puncture-proof or applying an unverified load rating.
The coated PU surface is designed for routine paw contact and everyday spills. Removing liquid promptly and wiping the surface can reduce the amount of moisture and dirt reaching the vehicle seat.
Seams, zipper openings, wear and incorrect installation can still allow moisture through, so the product is not described as universally or permanently waterproof.
A mesh center section maintains a visual opening between the front and rear seating areas, while side pockets hold small travel items. Raised front and side sections extend protection beyond the flat platform.
Storage pockets should carry light, non-sharp items only, and nothing should block airbags, door handles, window controls or the driver’s movement.
Dedicated openings keep vehicle buckles accessible through the platform. They are intended to preserve a route for a separately selected automotive restraint, not to certify the extender itself as crash protection.
Do not attach a dog by the collar, and do not treat a loose extension tether as equivalent to a crash-tested harness, carrier or crate.
The care sequence shows the zipper opening, removal of all three rigid panels and placement of the textile cover in a laundry bag. This separates the washable textile assembly from components that should not enter a washing machine.
Follow the sewn care label, dry the cover fully and reinstall every panel flat before the next trip.
Confirmed Hard-Bottom Backseat Extender Specification
| Specification | Confirmed Product Direction |
|---|---|
| Product Type | Back seat extender for dogs with hard bottom and hammock-style raised coverage |
| Standard Overall Size | 52 in W × 24.8 in D (approximately 132.1 × 63.0 cm) |
| Rear Seatback Section | 15.7 in (approximately 39.9 cm) |
| Front Footwell Section | 21.7 in (approximately 55.1 cm) |
| Side Wings | 15 in each (approximately 38.1 cm) |
| Folded Storage Size | 25.2 × 17.3 in (approximately 64.0 × 43.9 cm) |
| Hard Bottom | Three removable rigid load-bearing panels; exact board material, thickness and verified load rating not supplied |
| Layer Direction | PU surface, coated layer, 230T lining, PP cotton, rigid plates, 230T lining, TPU barrier, silicone anti-slip base |
| Visible Colorway | Black quilted surface with orange piping and teal/black mesh details |
| Attachment Direction | Adjustable straps around front and rear headrests; final buckle count and strap lengths require production confirmation |
| Configuration | Full-width dog platform or one-side folded passenger position |
| Access | Seat-belt openings, four zippered side connections, mesh center window and storage pockets |
| Care | Wipe PU surface; remove three rigid panels before washing textile cover in a laundry bag; follow care label |
| Moisture Direction | Water-resistant coated surface and inner moisture barrier; not presented as submersible or leakproof at every seam/opening |
| Vehicle Fit | Measure actual rear-seat width and depth, footwell gap, headrest type, door clearance and front-seat positions |
| Safety Scope | Not verified as a crash-tested pet restraint; use a separately verified automotive harness, carrier or crate |
| Load Capacity | Not supplied in the source; confirm with the final panel material, thickness, seam and attachment specification |
| Package Weight | Not supplied |
| Storage | Fold only along intended seams after the cover is dry; avoid bending removable rigid panels |
Build from the Confirmed 52 Inch Hard-Bottom Structure
Archova can supply the existing black-and-orange direction or review product-specific changes for wholesale and private-label programs. Dimensions, panel structure, seam layout and restraint access should be frozen before artwork and packaging are approved.
| Customization Area | Available Direction |
|---|---|
| Surface Color and Trim | Review PU surface colors, piping colors and coordinated mesh details against material availability and MOQ. |
| Quilting and Surface Texture | Review compatible stitch patterns or surface grains without changing the confirmed moisture and care specification. |
| Rigid Panel Specification | Panel material, thickness, count and target load testing can be developed only through project-specific engineering and validation. |
| Size and Vehicle Segment | Alternative widths or depths can be reviewed after target rear-seat measurements and attachment geometry are supplied. |
| Passenger Split | Full-width, split and partial-fold directions can be discussed while preserving a supported dog area and functional passenger restraint path. |
| Logo Placement | Woven labels, patches, printing or packaging branding can be reviewed on approved locations. |
| Accessory Set | Storage bag, restraint-access labels and compatible protective accessories can be quoted when specified in the order. |
| Retail Information | English fit diagrams, care instructions, model codes and private-label carton artwork can be developed after final specifications are confirmed. |
Folded Packing with the Rigid Panels Protected
The source confirms a folded storage size of 25.2 × 17.3 in but does not provide a verified retail carton, package weight, units per carton or container quantity. The final packing method should keep the three rigid panels flat, protect buckles and zipper pulls, and prevent the PU surface from being sharply creased.
| Packaging Item | Archova Order Direction |
|---|---|
| Folded Product Size | 25.2 × 17.3 in (approximately 64.0 × 43.9 cm), as shown in the supplied dimension graphic |
| Panel Protection | Keep rigid panels flat and fully inserted or separately protected according to the approved pack-out. |
| Straps and Hardware | Secure headrest straps, buckles and zipper pulls so they do not mark the PU surface during transit. |
| Moisture Control | Pack only after the cover is fully dry; use an agreed inner bag and carton specification. |
| Carton Dimensions | Confirmed after final material, panel and accessory specifications are approved. |
| Units per Carton | Confirmed by finished weight, folded thickness and target channel. |
| Instructions | Include vehicle-measuring, installation, restraint-access, cleaning and panel-reinstallation guidance. |
| Private-Label Pack | Retail carton artwork, model labels, barcodes and language versions can be quoted after artwork and order requirements are supplied. |
"The sample made the hard-bottom difference easy to explain, but the useful part for our launch was the revised fit diagram. We now ask customers to measure the rear bench and footwell instead of relying on a universal-car claim. The three removable boards and split passenger mode also gave us clear listing images for daily use."
Category Manager — Draft Example
Pet Travel Distributor — Replace Before Publishing
"We wanted the product photos to show more than a dog lying in the back seat. The zipper, layer and cleaning graphics answered the practical questions our service team receives. Removing the boards before washing and leaving the seat-belt openings visible are now part of our setup guide."
E-commerce Manager — Draft Example
Private-Label Pet Brand — Replace Before Publishing
"The half-width configuration was the feature our retail team noticed first. We still tested it in our target vehicles because front-seat position and fixed headrests changed the fit. Archova kept the comfort platform separate from the restraint claim, which made the final product description much clearer."
Sourcing Manager — Draft Example
Automotive Accessory Retailer — Replace Before Publishing
Contact our team for pricing, MOQ details, customization options, and OEM/ODM partnership opportunities.
