Premium B2B Pet Living

Our Product Collections

Explore Archova's full range of premium pet living solutions -- designed for global B2B partners seeking differentiation, quality, and margin.

Backseat Extender for Dogs Manufacturer | Hard Bottom Car Platform

Archova supplies a hard-bottom backseat extender for dogs that covers the rear bench and bridges the footwell gap with three removable rigid panels. The 52 × 24.8 in platform combines a quilted PU surface, mesh window, side coverage, storage pockets and adjustable headrest straps for everyday pet travel assortments.

Four zippered side connections support full-width and folded passenger configurations. Seat-belt access openings remain available, while the removable panels let pet owners clean the textile cover separately according to its care label.

This dog car seat extender is a comfort, space-management and vehicle-protection product. It is not presented as a crash-tested restraint, so the dog still needs an independently verified automotive harness, carrier or crate appropriate to the animal and vehicle.

Hard Bottom Dog Seat Cover Manufacturer | Rear Car Hammock

Archova supplies a hard bottom dog seat cover that protects the rear bench while three removable rigid panels support the area over the footwell. The standard 52 × 24.8 in layout combines a quilted PU contact surface, raised side panels, mesh window and storage pockets.

Four zippered side connections let the cover change between a full-width dog car hammock hard bottom layout and a separate passenger position. Seat-belt openings remain accessible, and the hard panels remove before the textile cover is washed.

This cover manages dirt, moisture and usable rear-seat space. It is not a crash-tested pet restraint, so pet owners still need an independently verified automotive harness, carrier or crate suited to the dog and vehicle.

Small Dog Car Seat Manufacturer | Convertible Travel Bed

Archova supplies a soft small dog car seat that creates a padded, defined space for rear-seat travel. The burgundy and ivory design combines high filled sides, two adjustable placement straps, an internal connection clip and a non-slip base.

Detachable button sections allow the compact seat to open into a portable rest bed or soft mat. Removable inner cushions simplify washing, while the water-resistant, hair-resistant surface supports routine wiping and lint removal between trips.

This car seat for small dogs is a comfort product rather than a crash-tested restraint. Use a separately verified vehicle harness, secured carrier or crate, and follow the vehicle and restraint instructions for rear-seat travel.

Dog Car Booster Seat Manufacturer | 5-Inch Raised Foam Seat

Archova supplies a five-inch raised dog car booster seat for small dogs and cats. The selected model measures about 19 × 18 × 18.5 inches and uses a 15 × 15 × 5-inch lift-out cushion inside padded side and back panels.

An egg-crate-profile foam insert raises the resting surface for a higher viewing position. Short-plush and breathable-mesh cushion surfaces support different seasonal preferences, while side pockets keep lightweight travel items nearby.

Headrest straps, seat-belt routing loops and a non-slip bottom help position the seat during everyday use. The internal connection strap is not presented as crash-tested protection, so pet owners still need a separately verified vehicle restraint or secured carrier.

Pet Car Seat for Dogs Manufacturer | Padded Travel Seat Beds

Archova supplies padded pet car seats for dogs in two clear product directions: compact high-bolster seats for one vehicle position and full-width rear-seat travel beds for broader seating coverage. Both formats give dogs a defined resting area while helping isolate loose hair and everyday dirt from vehicle upholstery.

The compact dog car seat range includes padded side walls, a detachable front cushion, carry handles, a storage pocket, zipper access and a non-slip bottom. Selected removable fabric shells can be wiped, vacuumed or machine washed after the cushion inserts and hardware are removed according to the approved care label.

This product is a comfort and seat-management accessory, not a crash-tested restraint. Use it in the rear seat with a separately verified vehicle restraint or secured carrier that is appropriate for the dog and installed according to its manufacturer instructions.

Cat Exercise Wheel Manufacturer | Modular PP Running Wheel

Archova supplies modular PP cat exercise wheels for indoor enrichment collections that need a lighter, knock-down alternative to one-piece wooden wheels. Snap-fit ring sections, a separate floor base and removable running-mat panels support compact packing, assembly and routine surface care.

Our current examples include grey-and-white and blue versions, compact and wider base directions, and grey or green running surfaces. The wheel is intended as an optional activity outlet for cats that accept the moving surface; it does not replace interactive play, weight-management advice or veterinary care.

Cat response varies. Retail content should explain gradual reward-based introduction, publish the confirmed wheel diameter and running width for each SKU, and avoid promising that every cat will use it or that every model is silent, lockable or suitable for the same body size.

Modular Cat Wall Furniture Manufacturer

Archova supplies modular cat wall furniture built around a wall-fixed perforated back panel and interchangeable climbing, resting, scratching and hideaway modules. Our sample range combines landing shelves, cat houses, clear half-dome beds, flexible bridges, stepped ramps and sisal-wrapped posts in one coordinated system.

Retail programs can begin with a compact starter set, expand into a full cat wall furniture set, or develop a route for a specific wall size. Visible sample layouts include 240 × 120 cm, 200 × 240 cm, 240 × 200 cm and 120 × 240 cm directions, while individual modules are quoted by their own dimensions and connector structure.

The back panel still requires reliable fixing to a suitable wall. Module positions may be adjusted only within the approved hole pattern and locking method; final wall hardware, load guidance, material declaration and large-cat suitability must be confirmed for each set.

Modern Cat Wall Shelves Manufacturer | Floating Pegboard Cat Shelves

We manufacture modern cat wall shelves and floating cat wall shelves for modular wood pegboard systems. Once the back panel is correctly fixed, compatible platforms, steps, scratching posts, cat houses and resting modules can be positioned within the approved hole pattern without drilling a separate group of wall holes for every normal module change.

The range includes compact stepping pegs, wider landing shelves, 50 cm multi-step climbers, enclosed cat houses, transparent half-bowl rests and sisal-wrapped transitions. These modules let a product line offer minimalist starter sets, multi-cat layouts and statement-wall assortments from one coordinated visual system.

We develop the shelf mix, panel size, route spacing, wood or plywood construction, grip direction, hardware and packaging around the intended cat profile and destination market. Final load data applies only to the approved module, back panel, connector and wall-installation combination.

Cat Wall Shelves Manufacturer | Modular Pegboard Cat Shelf Sets

We manufacture cat wall shelves for modular pegboard cat wall systems. Once the back panel is correctly fixed, compatible steps, platforms, bridges, scratching posts and resting modules can be positioned within the approved hole pattern without creating a separate group of wall holes for every shelf.

The range includes compact stepping points, wider landing shelves, flexible bridges, multi-step climbers, enclosed cat-house modules and sisal-wrapped transitions. These modules let a product line build active routes, gentler routes and separated resting positions from one coordinated connection system.

We develop the shelf mix, panel size, route spacing, material direction, surface grip, hardware and packaging around the intended cat profile and destination market. Final load data applies only to the approved module, back panel, connector and wall-installation combination.

Cat Climbing Wall Shelves Manufacturer | Modular Pegboard Cat Wall System

We manufacture cat climbing wall shelves as a modular pegboard cat wall system. A perforated wooden back panel is secured to the wall first, giving the shelves and activity modules a shared mounting surface instead of requiring a separate group of wall holes for every accessory.

The range can combine step shelves, wider landing platforms, cat houses, transparent capsules, sisal-wrapped climbing posts, ramps, curved bridges and fabric resting modules. These parts create active routes, gentler routes and separated resting positions for different indoor cat furniture programs.

We develop the panel layout, module mix and route spacing around the intended cat size, wall area and retail set level. Final wall anchors, load ratings and installation instructions are confirmed for the selected construction and wall type before production.

Wall Mounted Cat Furniture Manufacturer | Modular Pegboard Cat Wall System

We manufacture wall mounted cat furniture as a coordinated pegboard system rather than a group of unrelated shelves. A securely fixed perforated back panel supports compatible steps, landing platforms, scratching posts, cat houses and resting modules within one documented connection standard.

The range covers compact apartment sets, wide horizontal routes and full-height cat walls. Importers and brands can plan starter kits, expansion packs and replacement modules around the same visual language, while pet owners can adjust compatible furniture positions on the panel without drilling a new set of wall holes for every normal layout change.

We develop panel dimensions, module mix, route difficulty, material construction, grip surfaces, hardware, instructions and packaging for private-label and wholesale programs. Final load information applies only to the approved module, connector, back panel and wall-installation combination.

Pre-Filled Gel Cooling Mat for Dogs Manufacturer

Archova supplies pre-filled gel cooling mats for dogs, cats and warm-weather pet collections. The ready-to-use structure combines a PVC composite surface, flexible soft gel filling, segmented heat-pressed channels and a sealed perimeter. Pet owners place the mat flat without adding water, connecting electricity or refrigerating the product.

Four standard sizes cover compact through large resting areas: 40 x 30, 50 x 40, 60 x 50 and 90 x 60 cm. Multiple animal, summer and polar prints support seasonal retail assortments, while the waterproof surface helps pet owners manage hair, drool and paw marks with simple wipe-clean care.

The mat provides an optional cooler contact surface during supervised indoor or shaded use. It is not chew-proof or puncture-proof, and it does not replace fresh water, airflow, shade or urgent veterinary care when a pet shows signs of heatstroke.

Support & Inquiries

Questions & Contact

Find answers to common B2B questions, or send us a direct inquiry -- our team responds within 24 hours.

Frequently Asked Questions

What is a backseat extender for dogs?

It is a rear-seat cover with a supported platform that bridges the footwell gap behind the front seats. This model combines three removable rigid panels with raised front, rear and side coverage.

A soft hammock mainly suspends fabric between headrests, while this back seat extender for dogs hard bottom model adds rigid panels under the main surface. The panels create a flatter standing and lying area, but correct vehicle support and installation still matter.

The standard platform is marked 52 in wide by 24.8 in deep, approximately 132.1 × 63.0 cm. The supplied diagram also shows a 15.7 in rear panel, 21.7 in front panel and two 15 in side wings.

No universal fit is confirmed. Measure the usable rear-seat width, seat depth, footwell gap, headrest arrangement and door clearance, then compare them with the 52 × 24.8 in layout before ordering.

Different seat positions can make the supported section sit at an angle or reduce usable depth. Preserve a safe driving position first, then check that all three panels remain flat and supported without contacting seat rails or sharp edges.

The three-panel floor is designed to bridge the gap between the rear bench and front seatbacks. Actual coverage depends on vehicle geometry and seat position, so inspect both footwells after installation.

The supplied care graphic shows three removable rigid load-bearing panels. Their exact material, thickness and load rating are not supplied and should be confirmed on the production specification.

No verified load capacity is supplied for this SKU. Do not borrow a 400 lb or similar claim from another listing; capacity must be tested with the final panel material, seams, straps and installed support conditions.

Sagging can occur if panels are misplaced, damaged, partly inserted or not adequately supported by the vehicle layout. Install every panel fully, tension straps evenly and press-test the surface before loading the dog.

No. It manages space and protects the seat but is not presented as a crash-tested restraint. Use an independently verified automotive harness, secured carrier or crate suitable for the dog and vehicle.

No. A collar can concentrate force on the neck during sudden movement. Follow the instructions for the chosen automotive restraint and use a properly fitted harness or secured carrier/crate.

Yes. The images show access points that keep rear buckles reachable through the cover. Route the selected restraint without twisting it and confirm that the opening does not close around or obstruct the buckle.

The zipper layout allows one side to fold for a separate rear seating position. Confirm that the passenger has a normal seat belt, footwell and door path and that the remaining dog platform stays fully supported.

Compatibility is not automatic. Follow the vehicle and child-restraint manufacturer instructions, keep required anchors and belt paths accessible, and do not allow the extender or straps to interfere with the child seat.

They allow selected side sections to open, close or fold when changing configuration. Inspect zipper alignment before use and keep fabric and zipper pulls clear of door latches and seat rails.

The raised side wings cover common paw-contact areas near the rear doors. Coverage varies by vehicle, and the panels must not block handles, window controls, airbags or door latches.

The coated surface and inner TPU barrier provide a water-resistant direction, but seams, access openings, wear and installation can allow moisture through. Remove spills promptly and do not market the product as submersible or leakproof everywhere.

No scratch-proof claim is confirmed. The textured PU surface is intended for normal paw contact, but claws, chewing, sharp hardware and repeated abrasion can mark or puncture it.

Vacuum loose hair, wipe the PU surface and dry it before folding. For deeper cleaning, remove all three rigid panels and follow the sewn care label for the textile cover.

No. The rigid panels must be removed first. The supplied graphic places the textile cover in a laundry bag, but the final production care label controls the approved temperature, cycle and drying method.

Dry the cover completely, slide each rigid panel fully into its intended sleeve and close every zipper. Lay the product flat and check that the panel joints meet evenly before installing it in the vehicle.

The supplied folded size is approximately 25.2 × 17.3 in. Let the cover dry first, fold only along intended seams and store it without sharply bending or warping the removable rigid panels.

Confirm that the surface is flat and dry, all three panels are correctly positioned, buckles are closed, straps are evenly tensioned and seat-belt openings remain clear. Close each rear door slowly to make sure no fabric or hardware is trapped.

A flatter surface may be easier for some dogs to stand or lie on than an open-footwell hammock, but this is not a medical product. Add an appropriate non-bulky comfort layer only if it does not hide buckles, openings or panel joints.

Yes, subject to the selected material, logo method, color, trim, dimensions, packaging and order quantity. Structural or load-related changes require separate engineering and validation.

Approve the exterior dimensions, panel count and material, zipper layout, strap lengths, buckle type, mesh, pockets, seat-belt openings, care method, folded size and final pack-out. Keep the signed sample and specification tied to one stable model code.

MOQ depends on the base model, PU color, trim, quilting, panel specification, logo method and packaging. Archova can separate standard-product MOQ from any higher MOQ for custom materials or structural changes.

The source confirms a folded size of 25.2 × 17.3 in but not the final carton, packaged weight, units per carton or container quantity. These values are confirmed after the final product and accessory specification is approved.

Send an Inquiry

We respond within 24 hours.

🔒 Your information is kept private and never shared.

24h Reply

Low MOQ

Global Ship