Product Overview
| Feature | Confirmed Product Direction |
|---|---|
| Product Type | Hard bottom dog car seat cover with hammock-style raised protection |
| Standard Platform Size | 52 × 24.8 in (approximately 132.1 × 63.0 cm) |
| Hard Bottom | Three removable rigid panels; board material, thickness and verified load rating not supplied |
| Surface and Barrier | Quilted PU surface, coated layer and TPU moisture barrier with silicone anti-slip base |
| Protection Layout | 15.7 in seatback section, 21.7 in front section and two 15 in side wings |
| Travel Configurations | Full-width hammock cover and one-side folded passenger mode |
| Access and Storage | Mesh window, side pockets, four zipper connections and seat-belt access openings |
| Folded Storage Size | 25.2 × 17.3 in (approximately 64.0 × 43.9 cm) |
| Care Direction | Remove all three rigid panels before washing the textile cover; follow the sewn care label |
| Fit Requirement | Measure rear-seat width, platform depth, footwell gap, headrests, door clearance and restraint path |
Key Features & B2B Advantages
The integrated rigid floor supports the cover across the rear bench and footwell gap.
Raised seatback, front and side sections extend protection around common paw-contact areas.
A quilted PU surface handles routine dirt and spills while the silicone base helps resist cover movement.
Full-width and half-width layouts support dog-only travel or a separate rear passenger position.
The mesh window maintains a sightline without removing the front protective panel.
Seat-belt openings preserve access for a separately selected automotive restraint.
Removable panels allow deeper textile cleaning without putting rigid inserts into the washing machine.
Three removable rigid panels sit beneath the main floor and bridge the rear footwell. The result is a flatter covered area with less unsupported fabric under a dog’s paws.
The panel material and tested load capacity are not supplied. Each production SKU needs its own confirmed structure and rating.
The standard cover is marked 52 in wide by 24.8 in deep, approximately 132.1 × 63.0 cm. It also includes a 15.7 in seatback section, 21.7 in front section and two 15 in side wings.
Vehicle names alone do not confirm fit. Pet owners should compare the diagram with the actual bench, footwell, headrests, front-seat positions and doors.
The supplied construction graphic lists a PU surface, coated layer, 230T lining, PP cotton, rigid panels, a second 230T lining, TPU moisture barrier and silicone anti-slip base. Each layer has a different protective or structural role.
This construction should not be described as puncture-proof or assigned an unverified load rating.
The hammock layout extends beyond the flat bench with front, rear and side sections. Four zippered side connections help close the protective shape or open selected panels when the configuration changes.
The cover must stay clear of door latches, window controls, seat rails and vehicle airbags.
The center mesh maintains a sightline and airflow path between the front and rear seating areas. Side pockets provide a place for lightweight travel items without placing them on the protected seat.
Sharp, heavy or loose objects should not be stored where they can move during braking.
One side can fold to create a separate rear passenger position while the remaining section stays arranged for the dog. The zipper system avoids removing the complete hard bottom dog car seat cover.
The passenger belt, footwell and door path must remain usable, and the dog section must stay fully supported.
The care graphic shows the zipper opening, removal of all three rigid panels and placement of the textile cover in a laundry bag. Rigid inserts should not enter a washing machine.
Follow the sewn care label, dry the cover fully and reinstall each panel in its correct sleeve before use.
Dedicated openings preserve access to rear-seat buckles through the cover. They do not make the dog back seat cover hard bottom structure a crash-tested restraint.
Use a verified automotive harness, carrier or crate appropriate to the dog and vehicle, following its own instructions.
Confirmed Hard-Bottom Dog Seat Cover Specification
| Specification | Confirmed Product Direction |
|---|---|
| Product Type | Hard bottom dog seat cover with hammock-style rear-seat protection |
| Standard Overall Size | 52 in W × 24.8 in D (approximately 132.1 × 63.0 cm) |
| Rear Seatback Section | 15.7 in (approximately 39.9 cm) |
| Front Footwell Section | 21.7 in (approximately 55.1 cm) |
| Side Wings | 15 in each (approximately 38.1 cm) |
| Folded Storage Size | 25.2 × 17.3 in (approximately 64.0 × 43.9 cm) |
| Hard Bottom | Three removable rigid panels; exact board material, thickness and verified load rating not supplied |
| Layer Direction | PU surface, coated layer, 230T lining, PP cotton, rigid plates, 230T lining, TPU barrier, silicone anti-slip base |
| Visible Colorway | Black quilted surface with orange piping and teal/black mesh details |
| Attachment Direction | Adjustable straps around front and rear headrests; final buckle count and strap lengths require production confirmation |
| Configuration | Full-width protective hammock or one-side folded passenger position |
| Access | Seat-belt openings, four zippered side connections, mesh center window and storage pockets |
| Care | Wipe PU surface; remove three rigid panels before washing textile cover in a laundry bag; follow care label |
| Moisture Direction | Water-resistant coated surface and inner moisture barrier; not presented as submersible or leakproof at every seam/opening |
| Vehicle Fit | Measure actual rear-seat width and depth, footwell gap, headrest type, door clearance and front-seat positions |
| Safety Scope | Not verified as a crash-tested pet restraint; use a separately verified automotive harness, carrier or crate |
| Load Capacity | Not supplied in the source; confirm with the final panel material, thickness, seam and attachment specification |
| Package Weight | Not supplied |
| Storage | Fold only along intended seams after the cover is dry; avoid bending removable rigid panels |
Build from the Confirmed 52 Inch Protective Layout
Archova can supply the existing black-and-orange hard bottom dog seat cover or review product-specific changes for wholesale and private-label programs. Dimensions, panel structure, seam layout, moisture claims and restraint access must be finalized before artwork and packaging are approved.
| Customization Area | Available Direction |
|---|---|
| Surface Color and Trim | Review PU surface colors, piping colors and coordinated mesh details against material availability and MOQ. |
| Quilting and Surface Texture | Review compatible stitch patterns or surface grains without changing the confirmed moisture and care specification. |
| Rigid Panel Specification | Panel material, thickness, count and target load testing require project-specific engineering and validation. |
| Size and Vehicle Segment | Alternative widths or depths can be reviewed after target rear-seat measurements and attachment geometry are supplied. |
| Passenger Split | Full-width and partial-fold layouts can be reviewed while preserving a supported dog area and a functional passenger restraint path. |
| Logo Placement | Woven labels, patches, printing or packaging branding can be reviewed on approved locations. |
| Accessory Set | Storage bag, restraint-access labels and compatible protective accessories can be quoted when specified in the order. |
| Retail Information | English fit diagrams, care instructions, model codes and private-label carton artwork can be developed after final specifications are confirmed. |
Folded Packing Protects the Cover and Rigid Panels
The source confirms a folded storage size of 25.2 × 17.3 in but does not provide a verified retail carton, package weight, units per carton or container quantity. The approved pack-out should keep the three rigid panels flat, isolate buckles and zipper pulls, and avoid sharp creases in the PU surface.
| Packaging Item | Archova Order Direction |
|---|---|
| Folded Product Size | 25.2 × 17.3 in (approximately 64.0 × 43.9 cm), as shown in the supplied dimension graphic |
| Panel Protection | Keep rigid panels flat and fully inserted or separately protected according to the approved pack-out. |
| Straps and Hardware | Secure headrest straps, buckles and zipper pulls so they do not mark the PU surface during transit. |
| Moisture Control | Pack only after the cover is fully dry; use an agreed inner bag and carton specification. |
| Carton Dimensions | Confirmed after final material, panel and accessory specifications are approved. |
| Units per Carton | Confirmed by finished weight, folded thickness and target channel. |
| Instructions | Include vehicle-measuring, installation, protection limits, restraint-access, cleaning and panel-reinstallation guidance. |
| Private-Label Pack | Retail carton artwork, model labels, barcodes and language versions can be quoted after artwork and order requirements are supplied. |
"Our team expected a standard hammock, but the removable hard panels changed how the product felt in the vehicle. The revised measurement graphic was equally useful because it stopped us from calling the cover universal. We could explain the protected areas and fit limits before launch."
Category Manager — Draft Example
Pet Travel Distributor — Replace Before Publishing
"The material and cleaning images answered the questions our support team normally receives after purchase. Pet owners can see which layer is the PU surface and why the three boards come out before washing. That detail made the product easier to present accurately."
E-commerce Manager — Draft Example
Private-Label Pet Brand — Replace Before Publishing
"We chose this model for the raised side coverage and the option to leave one passenger seat open. We still checked front-seat position, headrests and door clearance in our target vehicles. Archova also kept the seat-cover claim separate from crash-restraint language."
Sourcing Manager — Draft Example
Automotive Accessory Retailer — Replace Before Publishing
Contact our team for pricing, MOQ details, customization options, and OEM/ODM partnership opportunities.