| Feature | Image-Led Product Direction |
|---|---|
| Product Type | High-density foam dog stairs / wave-profile foam dog steps / soft pet ramp |
| Visible Size Direction 1 | Approx. 39 × 40 × 30 cm |
| Visible Size Direction 2 | Approx. 56 × 40 × 35 cm |
| Visible Size Direction 3 | Approx. 70 × 40 × 45 cm |
| Alternative Visible Model | Approx. 70 × 38 × 36 cm |
| Angle Reference | Approx. 32° on one shown medium model; not universal across the range |
| Core | Supportive high-density foam direction; exact density / firmness confirmed by model |
| Upper Surface | Textured knitted / ribbed textile contact surface |
| Cover | Fitted cover; zipper removal is visibly confirmed on one shown construction |
| Bottom | Dotted non-slip bottom fabric — confirmed |
| Packing | Compression packing for suitable foam models |
| Primary Use | Indoor access beside sofas, couches, beds, chairs and resting platforms |
The image set shows a coordinated progression from approximately 30 cm to 35 cm and 45 cm overall height. This gives the range a clearer selection logic than generic “small / medium / large” naming: the buyer can start with the actual sofa or bed edge and then choose the closest access height while checking the final top transition.
The compact model is shown at approximately 39 cm long, 40 cm wide and 30 cm high. Its short footprint suits lower couches, chairs and low resting areas where a taller stair would create unnecessary bulk or an overly steep final transition.
The medium direction is shown at approximately 56 × 40 × 35 cm. It adds length and rounded paw-placement zones compared with the compact model while retaining a manageable indoor footprint. A bright version of this general size direction is also marked around a 32° overall incline.
The tallest primary direction is shown at approximately 70 × 40 × 45 cm. The extra length distributes the rise across more rounded transitions, making it the first size to consider for higher sofa or bed edges when sufficient floor space is available.
A separate lifestyle image shows another wave-shaped model at approximately 70 × 38 × 36 cm. It should be treated as a different product geometry, not mixed into the 40 cm-wide 30 / 35 / 45 cm series. This gives buyers another bedside direction when a slightly narrower width is preferred.
The profiles are not hard rectangular stairs. Each rise transitions through a rounded curve, creating clear paw-placement areas within a continuous incline. This is why the category can sit naturally between traditional dog steps and a soft pet ramp in search and merchandising language.
The core is a one-piece foam body shaped into the stair profile. The source product direction identifies high-density / supportive foam, but the images do not establish a universal kg/m³ value or compression rating. Foam firmness therefore needs to be locked by model and intended pet weight during sampling.
The upper cover close-up shows a visibly textured knit / rib structure instead of a smooth upholstery finish. This gives the climbing route tactile texture under the paws and follows the rounded profile continuously from the front edge to the upper landing.
The underside close-up shows a zipper opening with the foam body visible inside, confirming that at least one shown construction uses a removable fitted cover. Wash method, water temperature and drying instructions should still follow the approved textile and care label rather than a universal machine-wash claim.
The base close-up clearly shows dotted non-slip fabric, and this product is confirmed to use non-slip bottom material. The feature is designed to reduce normal movement on common indoor floors, but smooth floors, dust, moisture and fast pet movement can still affect real-world grip.
The 30, 35 and 45 cm-high examples are each shown around 40 cm wide. That consistency simplifies assortment planning, but 40 cm should not be presented as suitable for every dog: broader or heavier dogs may need more usable width and firmer support.
The supplied images show cream, grey, yellow, blue and green / yellow combinations. This supports both understated home-furnishing collections and more visible e-commerce colorways without changing the core wave-step concept.
| Specification | Archova Product Direction |
|---|---|
| Product Category | High-density foam dog stairs / foam dog steps / soft dog ramp |
| Primary Use | Indoor access to sofas, couches, beds, chairs and resting platforms |
| Visible Model 1 | Approx. 39 × 40 × 30 cm compact wave-step format |
| Visible Model 2 | Approx. 56 × 40 × 35 cm medium wave-step format |
| Visible Model 3 | Approx. 70 × 40 × 45 cm tall wave-step format |
| Alternative Visible Model | Approx. 70 × 38 × 36 cm bedside format |
| Main Width Direction | Approx. 40 cm across the three primary dimensioned examples |
| Angle Reference | Approx. 32° on one shown medium model; model-specific by geometry |
| Climbing Profile | Broad rounded wave transitions with upper landing |
| Core | High-density / supportive foam direction; final density and firmness confirmed by model |
| Upper Surface | Textured knitted / ribbed textile panel |
| Cover Construction | Fitted textile cover; zipper removal confirmed on one shown construction |
| Bottom | Dotted non-slip bottom fabric — confirmed |
| Carry / Pocket Details | Available on selected related cover designs where specified |
| Packing | Compression packing for suitable foam models |
| Load Rating | Confirmed by selected model after finished-product testing |
| Cover Care | Confirmed by approved textile, zipper construction and care label |
| Recovery Time | Confirmed by foam formulation, compression period and packing specification |
Build the Range Around Height, Firmness, Surface Grip and Cover Fit
The supplied images already provide several useful starting geometries. A private-label program can select a compact, medium, tall or alternative bedside profile, then lock the foam firmness, cover pattern, non-slip base and packaging around the intended pet and furniture range.
| Customization Area | Available Direction |
|---|---|
| Model Mix | Use the 30 / 35 / 45 cm primary height directions or the alternative 70 × 38 × 36 cm bedside format, subject to final sample confirmation. |
| Foam Density & Firmness | Specify foam performance by selected model and intended pet range rather than applying one density claim to every size. |
| Top Fabric | Textured knit, ribbed, plush, chenille, linen-look or other approved paw-contact fabrics can be sampled for traction, abrasion and cleaning. |
| Side Fabric & Color | Cream, grey, yellow, blue and other coordinated colorways can be developed with contrasting or tonal side panels. |
| Removable Cover | Zipper position, cover pattern, seam placement and replacement-cover program can be developed around the confirmed foam geometry. |
| Non-Slip Bottom | The confirmed dotted non-slip bottom can be specified by approved fabric, dot pattern, grip requirement and color. |
| Branding | Woven label, printed logo tag, care label, hangtag and insert card can be positioned on the approved cover pattern. |
| Retail Packaging | Compression bag, recovery instructions, barcode label, carton graphics and shipment marks can be matched to the final loading plan. |
Compression Packing for Suitable Foam Stair Models
Suitable foam stair models can be compressed to reduce storage and shipment volume. Because foam volume and geometry change across the 30, 35 and 45 cm height directions, recovery and carton validation should be completed by model rather than copying one packing specification across the range.
| Packaging Item | Confirmed Direction |
|---|---|
| Packing Method | Compression packing for suitable foam models |
| Model Separation | Compression level and carton size confirmed separately for each stair geometry |
| Recovery Check | Finished height, length, wave definition and base flatness checked after the stated recovery period |
| Cover Check | Cover tension, zipper area, seams and non-slip bottom inspected after foam recovery |
| Carton Data | Final carton dimensions, gross/net weight and units per carton supplied with quotation |
| Private-Label Packaging | Insert cards, care and recovery instructions, barcode labels and printed cartons available for confirmed programs |
"“We started with the 35 cm sample because it looked like the safest middle option, but once we measured the sofa and bed heights in our market the three-size story made much more sense. The 30 cm version works for lower furniture and the 45 cm version gives us a real step-up SKU instead of just another color. The dotted bottom was also worth keeping — on clean laminate it felt noticeably more planted than the plain-bottom foam stairs we had tested before.”"
Product Development Manager
European Pet Brand — Draft Review
"“Our biggest concern was not whether the foam felt soft; it was whether it stayed supportive after compression packing. We checked height recovery, the front edge and the last landing after unpacking. The sample recovered evenly, and the zipper cover sat tight once the foam was back to shape. For the taller model we asked for a firmer feel because some of our customers have heavier small dogs.”"
Sourcing Manager
Pet Products Importer — Draft Review
"“The product photographs became much easier to merchandise once we stopped calling everything ‘3-step’ or ‘4-step’ and showed the actual 30, 35 and 45 cm heights. The rounded profile is easy to explain as a stair-ramp hybrid, and the close-up of the non-slip base gives our listing team something concrete to show instead of making a vague ‘stable’ claim.”"
E-commerce Category Buyer
Omnichannel Pet Retailer — Draft Review
Contact our team for pricing, MOQ details, customization options, and OEM/ODM partnership opportunities.