| Specification | Archova Range |
|---|---|
| Product Type | Indoor curved foam dog ramp for couch and sofa access |
| Visible Size Directions | Approx. 39 × 40 × 30 cm; 56 × 40 × 35 cm; 70 × 40 × 45 cm |
| Profile Range | Compact three-level, medium four-level and extended five-level curved formats shown |
| Confirmed Incline Reference | One medium-size image is marked 32°; incline varies with the selected geometry |
| Core Direction | High-density rebound foam; final density and load rating confirmed by model |
| Paw-Contact Surface | Textured ribbed textile following the curved levels and top landing |
| Bottom | Dotted non-slip bottom fabric — confirmed |
| Primary Use | Couch, sofa and comparable low indoor furniture access |
| Packaging | Compression packed; recovery guidance supplied with the confirmed order |
The supplied images show compact, medium and extended configurations rather than one fixed ramp. Reference sizes are approximately 39 × 40 × 30 cm, 56 × 40 × 35 cm and 70 × 40 × 45 cm. This lets a collection cover lower sofas, standard couch seating and taller indoor furniture with a more deliberate size ladder.
The compact image direction measures approximately 39 cm long, 40 cm wide and 30 cm high. Its shorter footprint uses three broad curved levels, making it a space-conscious option for lower sofas, lounge chairs and small-room layouts where a long ramp would occupy too much floor area.
The medium version shown at approximately 56 × 40 × 35 cm creates a longer approach and additional paw-contact zones. The 40 cm width remains consistent in the shown size range, while the extra length produces a less abrupt route than the compact configuration.
The largest shown configuration measures approximately 70 × 40 × 45 cm and uses five visible curved levels including the upper landing. The longer body is intended for furniture that sits above the lower couch range, subject to matching the final ramp height with the actual seat or mattress edge.
This product is not a straight wedge and not a set of rigid square stairs. Each rounded transition creates a visible placement zone while the overall surface continues upward toward the landing. One medium-size image is marked at approximately 32°, so fixed-angle claims should be tied to the selected size rather than applied to the entire range.
Close-up imagery shows a ribbed, raised textile texture covering the climbing surface. The fabric follows the rounded transitions instead of leaving exposed foam at the step edges. Surface traction still depends on the final fabric specification and should be checked during sampling with dry paws and normal indoor use.
The underside uses black fabric with evenly distributed raised grip dots. This bottom treatment is intended to improve contact with wood, tile, vinyl and laminate floors and to reduce normal shifting. It should not be described as an absolute no-slide guarantee, because floor finish, dust and the dog’s speed still affect real use.
The document identifies a high-density rebound foam direction, and the full side profile in the images remains visibly defined across the compact, medium and extended models. Final foam density, compression deflection and tested load rating should be specified by model so the ramp does not feel too soft, bottom out or deform under the intended pet weight.
Each size includes a broad upper section that sits beside the couch or sofa. Correct fit depends on choosing a ramp height close to the actual furniture edge. A large mismatch can create a final jump or an awkward step-down, so furniture-height guidance should appear in listings and carton instructions.
The images show grey monochrome covers and two-tone combinations such as yellow with blue or green side panels. This supports a practical private-label range built around neutral home colors, brighter online-marketplace options or coordinated collections with beds and other pet furniture.
| Specification | Archova Product Direction |
|---|---|
| Product Category | Foam dog ramp / curved pet access ramp |
| Primary Use | Couch, sofa and comparable low indoor furniture access |
| Visible Model 1 | Approx. 39 × 40 × 30 cm compact curved ramp |
| Visible Model 2 | Approx. 56 × 40 × 35 cm medium curved ramp |
| Visible Model 3 | Approx. 70 × 40 × 45 cm extended curved ramp |
| Width Direction | 40 cm across the three dimensioned examples |
| Incline Reference | Approx. 32° on one shown medium model; geometry-specific by size |
| Profile | Curved ramp-and-step hybrid with broad rounded paw-contact levels |
| Core | High-density rebound foam direction; final density confirmed by selected model |
| Construction | One-piece foam direction stated in the source document |
| Cover | Fitted textured textile cover |
| Cover Styling | Ribbed top surface with plain or coordinated side panels |
| Bottom | Dotted non-slip bottom fabric — confirmed |
| Packaging | Compression packed |
| Recovery Guidance | Provided with the confirmed packing specification |
| Load Rating | Confirmed by model after testing; not fixed in the supplied data |
| Cover Care | Confirmed by final fabric and cover construction |
Begin with the Existing Curved Foam Ramp Range
Archova can start sampling from the compact, medium or extended foam-ramp directions shown in the supplied images. The final program should lock the selected dimensions, foam firmness, cover construction, bottom fabric and packing method before bulk production.
| Customization Area | Available Direction |
|---|---|
| Size Direction | Select the compact 30 cm, medium 35 cm or extended 45 cm height direction, subject to final sample confirmation. |
| Foam Specification | Density, firmness and tested load direction can be developed around the selected model and intended pet range. |
| Top Fabric | Ribbed, knitted or other approved textile directions can be sampled for paw contact and cover fit. |
| Color and Side Panels | Neutral monochrome or coordinated two-tone directions can be matched to the collection. |
| Brand Label | Private-label woven labels, printed labels or approved logo positions can be added to the confirmed cover. |
| Care and Recovery Insert | Cover-care, unpacking and foam-recovery instructions can be prepared for the destination market. |
| Retail Packaging | Carton marks, barcode labels, insert cards and private-label presentation can be developed with the loading plan. |
Compression Packing for Curved Foam Ramp Models
The foam ramp is compression packed to reduce shipment and storage volume. After opening, the foam requires time to recover its curved levels, base length and top landing. Recovery time should be stated by model because it varies with foam specification, compression period, storage temperature and carton dwell time.
| Packaging Item | Confirmed Direction |
|---|---|
| Packing Method | Compression packed |
| Model Separation | Compact, medium and extended ramps receive model-specific carton data |
| Recovery Guidance | Printed unpacking and recovery instructions supplied with the confirmed order |
| Display Readiness | Allow the ramp to recover fully before product photography, retail display or pet use |
| Quality Check after Recovery | Confirm overall dimensions, curved level definition, cover tension, seam alignment and bottom flatness |
| Private-Label Packaging | Available for confirmed order programs |
"“The three height directions were more useful to us than one generic ramp. We sampled the 30 cm and 35 cm versions first, checked them against our main sofa heights, and only then added the taller model. That made the range easier for our sales team to explain and reduced the risk of customers ordering a ramp that stopped below the cushion edge.”"
Product Development Manager
European Pet Brand — Draft Review
"“Our previous foam steps moved too easily on laminate floors, so the underside was one of the first things we checked. The dotted bottom fabric on the sample gave us a clearer stability story, but we also appreciated that Archova did not market it as impossible to slide. The final listing now tells customers to keep the floor clean and match the ramp to the furniture height.”"
Category Buyer
Regional Pet Products Importer — Draft Review
"“The cover fit and foam recovery mattered more than the color. After the compressed sample opened, we waited for the profile to return and checked every curved level, the top landing and the side seams. Once those points were consistent, the product photographed well and the 40 cm width looked substantial enough for our small-dog collection.”"
E-commerce Merchandising Lead
Online Pet Retail Program — Draft Review
Contact our team for pricing, MOQ details, customization options, and OEM/ODM partnership opportunities.