Our Product Collections

Archova is a plastic cat condo manufacturer for detachable indoor hideaways built from rigid plastic panels. The collection combines an enclosed resting compartment with model-specific ventilation, rounded entrances, top perch or scratch-pad directions, compact flat-pack assembly and coordinated color programs.

The source range includes round-entry models at approximately 54 × 39.5 × 43 cm and 56 × 41.7 × 46.2 cm, a 54 × 41 × 38 cm cat-ear doorway model, a 56 × 39 × 36 cm dual-opening model and a 54 × 40 × 45 cm slotted-panel direction. These measurements belong to separate pictured SKUs and must not be combined into one universal specification.

Selected modules can be stacked, disassembled for cleaning or supplied with anti-slip feet, a top scratch surface, solid roof or ventilated side panels. Outdoor placement, load capacity, resin grade, stack locking and weather resistance remain SKU-specific; this product line is not automatically an insulated winter shelter, escape-proof cage or litter-box enclosure.

Archova is a felted cat house manufacturer for structured 60 cm and 90 cm indoor hideaways. Detachable felt panels create multiple enclosed resting levels, large front openings, side visibility and an open top perch without the bulk of a carpet-covered cat tree.

The range shown includes rounded 37 x 37 cm models and perforated rounded-square 35 x 35 cm models. Selected configurations add removable sisal resting or scratching mats, hanging pom-poms and model-specific openings for hiding, observation and light play.

This felt cat house is not a hand-felted wool pod. Panel composition, connector type, mat set, opening map and finished size remain tied to the approved SKU, helping importers and private-label brands avoid wool claims or care instructions that do not match the actual product.

Archova is a felt cat tunnel manufacturer for donut-shaped indoor hide, play and rest products. The structured felt body creates a continuous enclosed ring, while the recessed top gives cats a second place to sit, curl up or watch the room.

A full-length center zipper joins the upper and lower shells. Once opened, the two halves can be separated for interior access, storage and model-specific cleaning. Round, cat-head and hexagonal entrance directions help private-label ranges create visible SKU differences without changing the core donut structure.

The image-supported range is approximately 50-51 cm diameter x 20 cm and 60-61 cm diameter x 28 cm. Fiber, entrance, care, bottom and packed specifications follow the approved SKU.

Archova supplies a round felt cat house cave that combines an enclosed resting space, a broad top platform and multiple peekaboo openings. Cats can hide through the side entrance, look through the central opening or reach through the smaller top holes during supervised play.

The assortment includes approximately 40 cm, 60 cm and 80 cm diameter directions. Pre-cut structured felt panels, perimeter slots and visible tabs create the cylindrical body, while color and opening patterns support different private-label collections.

This round felt cat cave house is different from a zipper-connected donut tunnel and from a soft felted wool cat house. Fiber composition, panel thickness, final height, care method and any load guidance remain tied to the approved SKU and sample.

Archova is a felt cat cave bed manufacturer for enclosed indoor hideaways developed around wet-felted wool construction. The seamless pod shape gives cats a darker resting area while the rounded entrance, dense felt surface and restrained colors fit design-led pet and home assortments.

Available directions include a classic felted wool cat cave, a decorative felted wool cat cave bed with felt-dot or color-block effects, and custom wool felt cat cave programs in solid or coordinated colors. One pictured round model is marked at approximately 45 × 45 × 20 cm; final external size, internal space, entrance and care method remain tied to the approved SKU and sample.

These cave beds are indoor resting products, not chew-proof toys, waterproof shelters or orthopedic mattresses. Cats that eat or suck wool need supervision or a different material, while older cats may need a separate supportive insert and a lower, wider entrance.

Archova is a cat house felt manufacturer for structured two-tier and three-tier indoor hideaways. Curved felt panels form separate resting levels with front entrances, side peek-through holes, hanging pom-poms and an open top platform.

The range includes compact cylindrical models and wider tree-stump silhouettes. Detachable panel construction supports more efficient packing, while model-specific mats or cushions create softer resting surfaces inside the compartments and on the top level.

This product is different from a soft hand-felted wool cat cave. It uses structured felt panels or a felt-covered composite panel system, so material, cleaning method, cushion inclusion and finished dimensions remain tied to the selected SKU.

Archova supplies foam ramps for dogs in several soft indoor access profiles rather than one fixed wedge. The supplied images show compact wave ramps, a longer multi-wave format, and a gentler wedge-style direction for couches, sofas and comparable indoor furniture. One photographed model is marked approximately 56 × 40 × 35 cm, while another image shows an approximately 32° incline reference.

The wave models use broad rounded transitions that sit between conventional stairs and a straight ramp, creating visible paw-contact zones without hard square risers. The product family uses a supportive foam body, fitted textile covers and a confirmed non-slip bottom fabric. Selected cover directions also show a rear carry loop and side storage pocket; these exterior details are treated as model-specific rather than universal.

Ramp performance depends on more than height alone. The finished height, run length, width, incline, foam firmness, upper-surface grip and bottom grip need to work together for the intended pet and furniture. For quotation, share the target sofa or bed height, preferred model/photo, intended pet size, order quantity, cover direction, branding requirements and destination market.

Archova supplies wave-profile foam dog stairs and soft pet ramp formats for access to sofas, beds, chairs and other indoor furniture. The supplied images show three dimensioned height directions – approximately 39 × 40 × 30 cm, 56 × 40 × 35 cm and 70 × 40 × 45 cm – plus coordinated taller and lower covered designs with the same rounded, furniture-friendly visual language.

Instead of hard square treads, the climbing route uses broad rounded transitions over a supportive foam body. The covered models show a textured textile contact surface, fitted side panels and, on selected versions, a rear carry loop and side pocket. This product also uses non-slip bottom fabric, giving the base additional grip on common indoor floors while keeping the construction soft and lightweight.

For quotation, share the preferred height direction, target furniture height, intended pet size, cover fabric and color, order quantity, branding requirements and destination market. Final foam firmness, tested load rating, cover-care method, dimensional tolerance and compression-recovery guidance are confirmed with the selected production model.

Archova supplies curved foam dog ramps for couch access in compact, medium and extended height directions. The product images show three practical size references: approximately 39 × 40 × 30 cm, 56 × 40 × 35 cm and 70 × 40 × 45 cm, allowing the range to match different sofa and low-furniture heights instead of forcing one profile into every use scene.

The ramp body combines a high-density rebound foam direction with broad rounded paw-contact levels and a top landing. A ribbed textile surface follows the curved profile, while the confirmed dotted non-slip bottom fabric helps the ramp resist movement on smooth indoor floors during normal use.

For quotation, share the preferred size direction, target furniture height, cover color and fabric, order quantity, branding requirements and destination market. Final foam density, tested load rating, cover-care method and recovery guidance are confirmed with the selected production model.

Archova supplies foam dog steps and soft wave-ramp formats for bedside access, with product shapes developed around small and short-legged pets that need an easier route to elevated indoor furniture. The supplied images show several related wave profiles rather than one fixed SKU: a compact 35° model, longer bedside designs, and a dimensioned model measuring approximately 70 × 38 × 36 cm.

The climbing surface uses broad rounded transitions instead of narrow square treads. Depending on the model, the cover is finished as a full-width textured or smooth textile surface with contrasting side panels, piping, a rear carry loop, and a small side pocket. This product line also uses non-slip bottom fabric, giving the base added grip on common indoor floors while retaining the soft foam construction.

For a true high-bed program, the stair height must be matched to the actual furniture edge. The shown 36 cm model is a confirmed image reference, not a universal high-bed height; taller beds may require a higher stair body or a longer ramp geometry rather than simply increasing steepness. For quotation, share the target bed height, preferred profile, intended pet size, order quantity, cover direction, branding requirements and destination market.

Dog pen panels should be sold as a matched system rather than described as universally interchangeable. Connector geometry, panel height, panel width, frame profile, door hardware, and support feet must match the selected model. For repeat-order and after-sales programs, we can organize model codes, panel types, connector packs, and packing labels so buyers and end users can identify the correct components.

For quotation, share the required panel style, starter or add-on set, panel count, target footprint, door-panel requirement, floor type, color direction, branding, spare-parts requirement, order quantity, and destination market.

The embedded product images identify HDPE panels and PP connectors on selected systems, with example height options of 60, 76, and 90 cm. Matching panel widths and assembled footprints vary by height and model. Door style, connector rigidity, support feet, suction options, and wall-end posts should be confirmed from the selected sample rather than treated as universal features.

For quotation, share the required height, panel count, finished footprint, enclosure or barrier layout, door position, floor type, color direction, branding, packing standard, order quantity, and destination market.