Our Product Collections

Archova supplies foam ramps for dogs in several soft indoor access profiles rather than one fixed wedge. The supplied images show compact wave ramps, a longer multi-wave format, and a gentler wedge-style direction for couches, sofas and comparable indoor furniture. One photographed model is marked approximately 56 × 40 × 35 cm, while another image shows an approximately 32° incline reference.

The wave models use broad rounded transitions that sit between conventional stairs and a straight ramp, creating visible paw-contact zones without hard square risers. The product family uses a supportive foam body, fitted textile covers and a confirmed non-slip bottom fabric. Selected cover directions also show a rear carry loop and side storage pocket; these exterior details are treated as model-specific rather than universal.

Ramp performance depends on more than height alone. The finished height, run length, width, incline, foam firmness, upper-surface grip and bottom grip need to work together for the intended pet and furniture. For quotation, share the target sofa or bed height, preferred model/photo, intended pet size, order quantity, cover direction, branding requirements and destination market.

Archova supplies wave-profile foam dog stairs and soft pet ramp formats for access to sofas, beds, chairs and other indoor furniture. The supplied images show three dimensioned height directions – approximately 39 × 40 × 30 cm, 56 × 40 × 35 cm and 70 × 40 × 45 cm – plus coordinated taller and lower covered designs with the same rounded, furniture-friendly visual language.

Instead of hard square treads, the climbing route uses broad rounded transitions over a supportive foam body. The covered models show a textured textile contact surface, fitted side panels and, on selected versions, a rear carry loop and side pocket. This product also uses non-slip bottom fabric, giving the base additional grip on common indoor floors while keeping the construction soft and lightweight.

For quotation, share the preferred height direction, target furniture height, intended pet size, cover fabric and color, order quantity, branding requirements and destination market. Final foam firmness, tested load rating, cover-care method, dimensional tolerance and compression-recovery guidance are confirmed with the selected production model.

Archova supplies curved foam dog ramps for couch access in compact, medium and extended height directions. The product images show three practical size references: approximately 39 × 40 × 30 cm, 56 × 40 × 35 cm and 70 × 40 × 45 cm, allowing the range to match different sofa and low-furniture heights instead of forcing one profile into every use scene.

The ramp body combines a high-density rebound foam direction with broad rounded paw-contact levels and a top landing. A ribbed textile surface follows the curved profile, while the confirmed dotted non-slip bottom fabric helps the ramp resist movement on smooth indoor floors during normal use.

For quotation, share the preferred size direction, target furniture height, cover color and fabric, order quantity, branding requirements and destination market. Final foam density, tested load rating, cover-care method and recovery guidance are confirmed with the selected production model.

Archova supplies foam dog steps and soft wave-ramp formats for bedside access, with product shapes developed around small and short-legged pets that need an easier route to elevated indoor furniture. The supplied images show several related wave profiles rather than one fixed SKU: a compact 35° model, longer bedside designs, and a dimensioned model measuring approximately 70 × 38 × 36 cm.

The climbing surface uses broad rounded transitions instead of narrow square treads. Depending on the model, the cover is finished as a full-width textured or smooth textile surface with contrasting side panels, piping, a rear carry loop, and a small side pocket. This product line also uses non-slip bottom fabric, giving the base added grip on common indoor floors while retaining the soft foam construction.

For a true high-bed program, the stair height must be matched to the actual furniture edge. The shown 36 cm model is a confirmed image reference, not a universal high-bed height; taller beds may require a higher stair body or a longer ramp geometry rather than simply increasing steepness. For quotation, share the target bed height, preferred profile, intended pet size, order quantity, cover direction, branding requirements and destination market.

Dog pen panels should be sold as a matched system rather than described as universally interchangeable. Connector geometry, panel height, panel width, frame profile, door hardware, and support feet must match the selected model. For repeat-order and after-sales programs, we can organize model codes, panel types, connector packs, and packing labels so buyers and end users can identify the correct components.

For quotation, share the required panel style, starter or add-on set, panel count, target footprint, door-panel requirement, floor type, color direction, branding, spare-parts requirement, order quantity, and destination market.

The embedded product images identify HDPE panels and PP connectors on selected systems, with example height options of 60, 76, and 90 cm. Matching panel widths and assembled footprints vary by height and model. Door style, connector rigidity, support feet, suction options, and wall-end posts should be confirmed from the selected sample rather than treated as universal features.

For quotation, share the required height, panel count, finished footprint, enclosure or barrier layout, door position, floor type, color direction, branding, packing standard, order quantity, and destination market.

The product images show more than one panel format. Some models use an opaque HDPE or ABS-style frame with a clear PET insert; the exact frame resin, transparent sheet material, panel thickness, and connector structure must be confirmed for the selected model. The SEO phrase “clear acrylic dog playpen” is widely used in the market, but it should not be treated as a material specification unless PMMA acrylic is actually confirmed.

For quotation, share the preferred panel size, finished layout, height, door and latch direction, floor type, transparent-sheet requirement, branding, packing standard, order quantity, and destination market.

Archova creates plastic pet space products with clean design, practical use, and flexible panel options. This 8 panel plastic dog pen is designed for puppy routines, small dog daily use, and simple indoor boundary management in apartments, living rooms, and pet corners.

The 8-panel set gives pet owners more usable space than a smaller starter pen while keeping the structure easy to explain, easy to clean, and easy to rearrange. Depending on the model, you can build a clear market offer around door style, panel style, color direction, logo option, and practical packaging.

For quotation, share the preferred panel style, approximate panel height, target market, branding request, and order quantity

Archova orthopedic dog sofas are built with an 8 cm latex mattress, PP-cotton-filled rear and side bolsters, a removable splash-resistant outer cover, a waterproof inner liner and a non-slip underside.

Our floor-level sofa profile combines a defined mattress base with soft surrounding support for curling, leaning and head resting. The lowered front section keeps the entry side open while the rear and side bolsters maintain the enclosed sofa shape.

The ready-developed off-white model is available in M, L and XL, covering recommended body lengths from 48 cm to 88 cm and pet weights up to 35 kg. The structured upholstery and neutral colour place the product within indoor pet furniture, orthopedic comfort and home-lifestyle collections.

Archova orthopedic dog mattresses use a fully removable, glue-free layered construction built for breathable support, moisture control and straightforward cleaning. The confirmed model combines stain- and mite-resistant surface fabric, a resilient 4D air-fiber layer, eco-friendly coir-alternative padding and an ultrasonic-quilted waterproof non-slip base.

Every layer separates from the mattress structure for water washing. The flat open format leaves the full top surface available for resting, while the 4D air fiber and medium-support filling create a breathable alternative to a solid foam block.

Our ready-developed range includes S, M and L sizes from 45 × 60 cm to 70 × 90 cm. Custom dimensions are also available for pet brands and private-label programs requiring a different size architecture.

Archova supplies New Zealand pet brands, importers, distributors, retailers and online ranges with layered orthopedic dog beds in eight size formats. This sofa-style model combines gel-infused memory foam, egg-crate orthopedic foam, a TPU-protected sleeping surface, raised cushioned sides and a non-slip bottom within one foam-and-cover construction.

Archova is an international manufacturer and supply partner for the New Zealand market rather than a domestic NZ retail stockist. The range is prepared for wholesale, import and private-label programs, with metric-first product data, crate-fit variants and usable sleeping-area measurements ready for local listings.

Archova offers ready-developed orthopedic dog beds for brands and retailers that need more than one mattress with a different cover. Our range brings together flat beds, low-entry bolsters, sofa-style models and furniture-led designs, with foam and material choices suited to different price levels and pet needs.

You can begin with an existing model, adapt selected details when the construction allows, or develop a more distinctive private-label direction. Because the specifications vary by model, the page keeps size, foam, cover care and protection features tied to the product that actually uses them.